Today
Secret
Unspecified
None
Aerospace and Aviation
Portland, OR (On-Site/Office)
Duties
As a SHEET METAL MECHANIC (AIRCRAFT), WG-3806-10, this position is located within a National Guard aircraft maintenance organization. Its primary purpose is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and non-powered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing.
(1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions.
(2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight.
(3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles.
(4) Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal to metal bonding where delimitation of surfaces and core material occurs in control surfaces.
(5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and non-powered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures.
(6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables.
(7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development.
(8) Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity.
(9) Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders.
(10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner.
(11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials.
(12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings.
(13) Performs other duties as assigned.
*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.
Requirements
Conditions of Employment
Areas of Consideration:
Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG.
Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG.
Area 3 - Current service members in the Oregon ANG.
Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard.
Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG.
GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS:
Work involves the fabrication, modification, repair, assembly, and installation of sheet metal parts, items, and assemblies. Metals include but are not restricted to galvanized and black iron, aluminum and aluminum alloys, stainless steel, copper, and brass sheets, lead alloys and bronze. Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams.
WG-10 - Must have 18 months experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.
Education
None
Additional information
The following applies to Bargaining Unit Positions:
Bargaining unit positions within the Oregon National Guard that are represented by AFGE, local 2986 (AFL-CIO).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume will be used to determine if you meet the qualifications listed on this announcement. Your supporting documentation will used to determine eligibility. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.
Qualified candidates will be assigned to a quality category. The quality categories are:
1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.
In order to qualify for this position you must submit the following:Detailed resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed. Supporting documentation that show you meet the military rank and AFSC requirements if necessary (Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214). Transcripts, license, or certification that you meet the education requirements if necessary. The following items may be submitted as supporting documentation:
Cover Letter, DD-214/ Statement of Service, Diploma/ GED, Disability Letter (Schedule A), Disability Letter (VA), License, OF-306, Form DD369 Police Record Check, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-15, SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript
RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Edward Chitwood
Phone (971) 355-3303 Email edward.d.chitwood.civ@army.mil
Address Oregon Air National Guard 142d Wing
6801 NE Cornfoot Rd
Portland, OR 97218
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.
Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil
Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil
Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
As a SHEET METAL MECHANIC (AIRCRAFT), WG-3806-10, this position is located within a National Guard aircraft maintenance organization. Its primary purpose is to accomplish the inspection, repair, modification, installation and troubleshooting of sheet metal, fiberglass, bonded honeycomb and other structural materials and components as well as treatment (i.e., mechanical and chemical), and painting of missiles, aircraft powered and non-powered Aerospace Ground Equipment (AGE), and monitoring aircraft and equipment washing.
(1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red "X" conditions.
(2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight.
(3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metal working equipment. Determines shear and bearing load factors during rivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles.
(4) Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal to metal bonding where delimitation of surfaces and core material occurs in control surfaces.
(5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and non-powered tools and equipment. Repairs or replaces retaining frames and installs plastic laminated blanks. Designs and constructs forming fixtures.
(6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables.
(7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting, forming and assembling. Devise and calculates patterns employing the principles of triangulation, radial and parallel line development.
(8) Sets up and operates power shears, brakes, rolls, dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal working equipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity.
(9) Prepares and designs layout, dies, jigs, and templates necessary to carry out fabrication repair or modification of aircraft, engine, AGE, and other equipment. Works from blueprints, technical orders diagrams, and work orders.
(10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner.
(11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such as acids and caustics for passivation and etching, to protect metal from oxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials.
(12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings.
(13) Performs other duties as assigned.
*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.
Requirements
Conditions of Employment
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Participation in direct deposit is mandatory.
- U.S. citizenship is required.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
- Federal employment suitability required and determined by a background investigation before appointment to position.
- May be required to successfully complete a probationary period.
- Must have a valid driver's license.
- Must be able to obtain/maintain the necessary security clearance for the position.
- Military Assignment Requirement: Open to Enlisted members only
- Military Rank/Grade Requirement: Minimum Rank SrA/E-4 to Maximum Rank SSgt/E-5.
- Compatible Military AFSC Requirement: 2A7X3
- Cross training opportunity - Applicants who do not possess the compatible AFSC will still be considered but must meet Specialized experience qualifications listed below. Must attend technical school for award of the AFSC within 12 months of hire.
- Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214.
Areas of Consideration:
Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG.
Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG.
Area 3 - Current service members in the Oregon ANG.
Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard.
Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG.
GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS:
Work involves the fabrication, modification, repair, assembly, and installation of sheet metal parts, items, and assemblies. Metals include but are not restricted to galvanized and black iron, aluminum and aluminum alloys, stainless steel, copper, and brass sheets, lead alloys and bronze. Experience or training that has provided the candidate with the ability to plan, manufacture, and install cylindrical, square, or rectangular-shaped objects that have easily constructed fastenings such as single and double-hem edges and single, double or grooved seams.
WG-10 - Must have 18 months experience or training in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-bottom seams, burred-bottom seams, or wired or lock seams. Experience using more complicated shop tools and equipment. Experience in using metals including stainless steel, copper sheet, magnesium, honeycomb material and alloys. Experience demonstrating the use of more complicated mathematical calculations and complicated measuring instruments.
Education
None
Additional information
The following applies to Bargaining Unit Positions:
Bargaining unit positions within the Oregon National Guard that are represented by AFGE, local 2986 (AFL-CIO).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume will be used to determine if you meet the qualifications listed on this announcement. Your supporting documentation will used to determine eligibility. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.
Qualified candidates will be assigned to a quality category. The quality categories are:
1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
In order to qualify for this position you must submit the following: - Detailed resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
- Supporting documentation that show you meet the military rank and AFSC requirements if necessary (Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214).
- Transcripts, license, or certification that you meet the education requirements if necessary. The following items may be submitted as supporting documentation:
- How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Edward Chitwood
Phone (971) 355-3303 Email edward.d.chitwood.civ@army.mil
Address Oregon Air National Guard 142d Wing
6801 NE Cornfoot Rd
Portland, OR 97218
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.
Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil
Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil
Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
Cover Letter, DD-214/ Statement of Service, Diploma/ GED, Disability Letter (Schedule A), Disability Letter (VA), License, OF-306, Form DD369 Police Record Check, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-15, SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript
RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
In order to qualify for this position you must submit the following:
Cover Letter, DD-214/ Statement of Service, Diploma/ GED, Disability Letter (Schedule A), Disability Letter (VA), License, OF-306, Form DD369 Police Record Check, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-15, SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript
RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Edward Chitwood
Phone (971) 355-3303 Email edward.d.chitwood.civ@army.mil
Address Oregon Air National Guard 142d Wing
6801 NE Cornfoot Rd
Portland, OR 97218
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.
Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil
Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil
Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOAF
