Today
Secret
Unspecified
Unspecified
Raleigh, NC (On-Site/Office)
Duties
As an WELDER, WG-3703-10 you will perform welding duties using electric, acetylene, and/or inert gas shielded welding processes, pre-heating, brazing, head welding, tack welding, flame cutting, pressure welding, and heat treating; use templates, jigs, blueprints, and other guides to repair, modify, or fabricate metal items including repair of light or intricately made mechanical parts, which must fit in assemblies where close tolerances are required; make numerous types of joints using flat, vertical, horizontal, and overhead positions on light and heavy equipment such as axles, frames, gun mounts and components, carriers, tanks, metal decks constructed of a variety of weldable metals; weld or reinforce heavy armor plate. Performs precision welding on jigs, dies, engineering and automotive equipment; braze dissimilar metals; flame cuts metal to size for fabrication, using regular welding equipment utilize basic sheet metal tools and equipment such as a bender, press, roller, shear, and band saw to repair and/or fabricate a variety of equipment air conditioning and heater duct units, storage cabinets, and components for armored personnel carriers; read and interpret blueprints and sketches; lay out, positions, and clamps work; selects type of rod and size of tip to accomplish weld; determine heat necessary; adjusts equipment accordingly; manually maintains proper speed, flame motion, tip and angle, and position of the welding flame to produce desired pattern.
Requirements
Conditions of Employment
Military Grades: Enlisted (E7 and below)
Minimum Requirements: Experience or training that has provided the candidate with the basic knowledge of welding processes. Must have knowledge of technical orders, blueprints and specifications.
Specialized Experience: Experience or training demonstrating the application of a variety of electric resistance welding processes and equipment. Experience in using accepted trade methods and a variety of manual welding processes to weld all types of commonly used metals in various shapes, sizes and thicknesses. Experience using a wider range of metal welding processes to make more difficult welds meeting close tolerance, strength and other requirements. These welds may be in hard to reach places. Experience which allows the welder to devise special jigs and fixtures to hold the parts to be welded. Experience which demonstrates knowledge of several related trade procedures. Experience which enables the lay out and planning of work from blueprints, sketches, drawings, specifications and work orders.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. You may contact the positions POC before the closing date to request a review of your resume prior to submitting on USA Jobs.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12709704
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
SFC Willie Coe
Phone 984-664-6454 Email WILLIE.B.COE.MIL@ARMY.MIL
Address NC G4
1636 Gold Star Drive
Raleigh, NC 27607
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
As an WELDER, WG-3703-10 you will perform welding duties using electric, acetylene, and/or inert gas shielded welding processes, pre-heating, brazing, head welding, tack welding, flame cutting, pressure welding, and heat treating; use templates, jigs, blueprints, and other guides to repair, modify, or fabricate metal items including repair of light or intricately made mechanical parts, which must fit in assemblies where close tolerances are required; make numerous types of joints using flat, vertical, horizontal, and overhead positions on light and heavy equipment such as axles, frames, gun mounts and components, carriers, tanks, metal decks constructed of a variety of weldable metals; weld or reinforce heavy armor plate. Performs precision welding on jigs, dies, engineering and automotive equipment; braze dissimilar metals; flame cuts metal to size for fabrication, using regular welding equipment utilize basic sheet metal tools and equipment such as a bender, press, roller, shear, and band saw to repair and/or fabricate a variety of equipment air conditioning and heater duct units, storage cabinets, and components for armored personnel carriers; read and interpret blueprints and sketches; lay out, positions, and clamps work; selects type of rod and size of tip to accomplish weld; determine heat necessary; adjusts equipment accordingly; manually maintains proper speed, flame motion, tip and angle, and position of the welding flame to produce desired pattern.
Requirements
Conditions of Employment
- NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
- This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
- Selectee will be required to wear the military uniform.
- Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
- Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
- Males born after 31 December 1959 must be registered for Selective Service.
- Federal employment suitability as determined by a background investigation.
- May be required to successfully complete a probationary period.
- Participation in direct deposit is mandatory.
Military Grades: Enlisted (E7 and below)
Minimum Requirements: Experience or training that has provided the candidate with the basic knowledge of welding processes. Must have knowledge of technical orders, blueprints and specifications.
Specialized Experience: Experience or training demonstrating the application of a variety of electric resistance welding processes and equipment. Experience in using accepted trade methods and a variety of manual welding processes to weld all types of commonly used metals in various shapes, sizes and thicknesses. Experience using a wider range of metal welding processes to make more difficult welds meeting close tolerance, strength and other requirements. These welds may be in hard to reach places. Experience which allows the welder to devise special jigs and fixtures to hold the parts to be welded. Experience which demonstrates knowledge of several related trade procedures. Experience which enables the lay out and planning of work from blueprints, sketches, drawings, specifications and work orders.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. You may contact the positions POC before the closing date to request a review of your resume prior to submitting on USA Jobs.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. - How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12709704
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
SFC Willie Coe
Phone 984-664-6454 Email WILLIE.B.COE.MIL@ARMY.MIL
Address NC G4
1636 Gold Star Drive
Raleigh, NC 27607
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. You may contact the positions POC before the closing date to request a review of your resume prior to submitting on USA Jobs.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12709704
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
SFC Willie Coe
Phone 984-664-6454 Email WILLIE.B.COE.MIL@ARMY.MIL
Address NC G4
1636 Gold Star Drive
Raleigh, NC 27607
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOA
