Today
Secret
Mid Level Career (5+ yrs experience)
$85 - $90 per hour
No Traveling
Unspecified
Engineering - Mechanical
Lexington, MA (On/Off-Site)
Job Title: Design Engineer
Job Location: Lexington, MA 02420
Onsite Requirements:
* Experience in one or more of the following areas - mechanical/mechanisms, optical-mechanical, electronic packaging or structural.
* Knowledge of mechanical fabrication and assembly techniques including conventional machines of metal. Additive manufacturing, not including molding, knowledge will also be considered.
* Opto-mechanics, structures, or electronic packaging design. Knowledgeable of design for manufacturability using conventional machining. Knowledgeable of ASME, GD&T and MIL-Specs required.
Job Description:
* The candidate will design and document mechanical components and assemblies in collaboration with engineering staff.
* He/she would be responsible for performing design calculations and initiating design concepts, layouts, and finished manufacturing drawings specifying dimensional tolerances, surface finishes, and materials.
* There will be preparation of engineering release/revision documentation, as well as assisting in producing fabrication orders and supporting the fabrication and assembly process, as required.
Required Skills:
* Candidate must have the following qualifications:
* Experience in one or more of the following areas - mechanical/mechanisms, optical-mechanical, electronic packaging, or structural.
* Knowledge of mechanical fabrication and assembly techniques including conventional machining of metal. Additive manufacturing, not including molding, knowledge will also be considered.
* Opto-mechanics, structures, or electronic packaging design. Knowledgeable of design for manufacturability using conventional machining. Knowledgeable of ASME, GD&T, and MIL-Specs required.
* Knowledge of ASME Y14 family of standards, and specific experience using ASME Y14.5 GD&T.
* Minimum 4 years of experience designing with SolidWorks. Candidates without SolidWorks experience will not be considered.
* Capable of developing own concepts, design layouts, and basic calculations to support their design.
* Must have good communication skills, require little or no supervision, and possess good creative skills.
* Candidates having experience primarily with plastic and/or molding design will not be considered.
* Candidates with only low-level design skills (simple bracket design, drafting, etc.) will not be considered. Must show experience designing assemblies with some complexity.
* The majority of a candidate's experience should be designing machined components. Sheet metal experience will not be considered valuable.
* Must have good communication skills, require little or no supervision, and possess good creative skills.
* Candidates must be enthusiastic, innovative, and motivated self-starters able to work independently, or with an interdisciplinary group, to achieve program requirements. They must possess strong oral and written communication skills, and must be able to present findings/results to internal and external organizations.
Preferred Skills:
* Familiarity with standards and established practices in; aircraft, missile, spacecraft, and ground support equipment.
* Capable of developing own concepts, design layouts, and basic calculations to support their design.
* Must have good communication skills, require little or no supervision, and possess good creative skills.
Education:
* Bachelor's Degree is preferred but not required; a minimum of 9 years of relevant experience.
Skill Matrix:
Qualification
Assessment
Must Have
Mechanical Designer
5 years
Mechanism Design
5 years
Product Design
5 years
Mechanical
Knowledge of ASME Y14 family of standards, and specific experience using ASME Y14.5 GD&T.
1 year
Mechanical - Electronic Packaging
5 years
Mechanical Engineer
5 years
Software
SolidWorks 3D Computer-Aided Design (CAD)
5 years
Nice to Have
Degree Level
Yes
Mechanical
Mechanical - Aircraft/Missile/Satellite System
0 years
Mechanical - Opto
0 years
* ** 3rd party and subcontract staffing agencies are not eligible for partnership on this position. 3rd party subcontractors need not apply.
* This position requires candidates to be eligible to work in the United States, directly for an employer, without sponsorship now or anytime in the future.
* This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role.
* Due to the nature of the work, a United States Government Clearance is required to be eligible for the position. **
Job Location: Lexington, MA 02420
Onsite Requirements:
* Experience in one or more of the following areas - mechanical/mechanisms, optical-mechanical, electronic packaging or structural.
* Knowledge of mechanical fabrication and assembly techniques including conventional machines of metal. Additive manufacturing, not including molding, knowledge will also be considered.
* Opto-mechanics, structures, or electronic packaging design. Knowledgeable of design for manufacturability using conventional machining. Knowledgeable of ASME, GD&T and MIL-Specs required.
Job Description:
* The candidate will design and document mechanical components and assemblies in collaboration with engineering staff.
* He/she would be responsible for performing design calculations and initiating design concepts, layouts, and finished manufacturing drawings specifying dimensional tolerances, surface finishes, and materials.
* There will be preparation of engineering release/revision documentation, as well as assisting in producing fabrication orders and supporting the fabrication and assembly process, as required.
Required Skills:
* Candidate must have the following qualifications:
* Experience in one or more of the following areas - mechanical/mechanisms, optical-mechanical, electronic packaging, or structural.
* Knowledge of mechanical fabrication and assembly techniques including conventional machining of metal. Additive manufacturing, not including molding, knowledge will also be considered.
* Opto-mechanics, structures, or electronic packaging design. Knowledgeable of design for manufacturability using conventional machining. Knowledgeable of ASME, GD&T, and MIL-Specs required.
* Knowledge of ASME Y14 family of standards, and specific experience using ASME Y14.5 GD&T.
* Minimum 4 years of experience designing with SolidWorks. Candidates without SolidWorks experience will not be considered.
* Capable of developing own concepts, design layouts, and basic calculations to support their design.
* Must have good communication skills, require little or no supervision, and possess good creative skills.
* Candidates having experience primarily with plastic and/or molding design will not be considered.
* Candidates with only low-level design skills (simple bracket design, drafting, etc.) will not be considered. Must show experience designing assemblies with some complexity.
* The majority of a candidate's experience should be designing machined components. Sheet metal experience will not be considered valuable.
* Must have good communication skills, require little or no supervision, and possess good creative skills.
* Candidates must be enthusiastic, innovative, and motivated self-starters able to work independently, or with an interdisciplinary group, to achieve program requirements. They must possess strong oral and written communication skills, and must be able to present findings/results to internal and external organizations.
Preferred Skills:
* Familiarity with standards and established practices in; aircraft, missile, spacecraft, and ground support equipment.
* Capable of developing own concepts, design layouts, and basic calculations to support their design.
* Must have good communication skills, require little or no supervision, and possess good creative skills.
Education:
* Bachelor's Degree is preferred but not required; a minimum of 9 years of relevant experience.
Skill Matrix:
Qualification
Assessment
Must Have
Mechanical Designer
5 years
Mechanism Design
5 years
Product Design
5 years
Mechanical
Knowledge of ASME Y14 family of standards, and specific experience using ASME Y14.5 GD&T.
1 year
Mechanical - Electronic Packaging
5 years
Mechanical Engineer
5 years
Software
SolidWorks 3D Computer-Aided Design (CAD)
5 years
Nice to Have
Degree Level
Yes
Mechanical
Mechanical - Aircraft/Missile/Satellite System
0 years
Mechanical - Opto
0 years
* ** 3rd party and subcontract staffing agencies are not eligible for partnership on this position. 3rd party subcontractors need not apply.
* This position requires candidates to be eligible to work in the United States, directly for an employer, without sponsorship now or anytime in the future.
* This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role.
* Due to the nature of the work, a United States Government Clearance is required to be eligible for the position. **
group id: softwinc
