Today
Secret
Unspecified
Unspecified
IT - Hardware
Kingsley Field, OR (On-Site/Office)
Duties
As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13, this position works within an Air National Guard Aviation Wing, Maintenance Group, Aircraft Maintenance Squadron, Avionics Element, Avionics Shop, Communications/Navigation/ECM, or Guidance and Control shop. It is an Air National dual status technician position that requires military membership, compatible military skill assignment and classification. The primary purpose of this position is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. The worker in this career field must demonstrate the ability to perform on- or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs.
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Uses algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Installs, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned.
3. Performs other duties as assigned.
*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.
Requirements
Conditions of Employment
Areas of Consideration:
Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG.
Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG.
Area 3 - Current service members in the Oregon ANG.
Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard.
Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG.
GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS:
An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade. Experience that prepares the applicant to perform the duties of the position. The applicant s educational-degree study program or specific academic courses may substitute for some specialized experience. An applicant must demonstrate the identified specialized experience competencies (skills, knowledge, abilities and behaviors) to qualify for a FWS 2610 position as identified by its applicable grade.
WG-13 (Flight-Line)
The applicant must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level (7-Level) of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable-units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Experiences involved adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Skilled in the installation of serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Experienced and skilled in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Must have a thorough working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system. Experienced in evaluating operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determining repair sequence process and performing required repairs. Experiences involved reviewing and analyzing maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Skilled in performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs. Experienced in monitoring the operations of complex, inter-related systems, analyzing operating trends, and proposing preventative maintenance down time. Skilled in the applications of technical data and equipment specifications that determine the impact equipment modifications or substitutions on integrated multi-system operations and various maintenance alignment procedures. Competent in using algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Experiences involved the installation, operation, and repair work on prototypes or experimental electronic systems such as, inertial navigation or automatic flight control. Competent in advising aerospace engineering personnel on the operation and maintenance effects of proposed time compliance technical orders modifications on new or existing equipment.
WG-12 (Flight-Line)
This position is an apprentice or journeyman skill level designed as a developmental opportunity to qualify for merit promotion to the dual status technician PD# D2240P01, Electronic Integrated Systems Mechanic, WG-2610-13, craftsman expertise. Must have at least a three-skill level in one of the compatible PAFSCs, with 12 months of work experience or compatable aircraft maintenance/armament/munitions craftsman (or seven skill level), and required ASVAB scores required by FWS 2610 PAFSC and be able to successfully complete formal training that will result in the award of a compatible Five Skill Level AFSC. NOTE: To credit work experiences gained from completing the compatible PAFSC technical training school program, the applicant must submit technical school certificate(s) and student evaluation(s) to support/verify AFSC work experiences and skills performed while attending the applicable Air Force technical school(s).
Experiences involved installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Skilled in performing on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial or radar navigation systems. Experiences included performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Skilled in conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units. Capable of isolating unusual malfunctions by using technical orders, schematics, wiring diagrams, tools, and test equipment to include automatic test equipment and flight line test systems. Experiences involved solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems.
Education
For the WG-13 ANG Dual Status Technician positions, the mandatory military education requirements are the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC, along with the successful completion of at least one military professional education course program.
For the WG-12 ANG Dual Status Technician positions, the mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC.
Additional information
The following applies to Bargaining Unit Positions:
Bargaining unit positions within the Oregon National Guard that are represented by AFGE, local 2986 (AFL-CIO).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume will be used to determine if you meet the qualifications listed on this announcement. Your supporting documentation will used to determine eligibility. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.
Qualified candidates will be assigned to a quality category. The quality categories are:
1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.
In order to qualify for this position you must submit the following:Detailed resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed. Supporting documentation that show you meet the military rank and AFSC requirements if necessary (Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214). Transcripts, license, or certification that you meet the education requirements if necessary. The following items may be submitted as supporting documentation:
Cover Letter, DD-214/ Statement of Service, Diploma/ GED, Disability Letter (Schedule A), Disability Letter (VA), License, OF-306, Police Background Check - DD369, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-15, SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript
RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Edward Chitwood
Phone (971) 355-3303 Fax (503)581-4164 Email edward.d.chitwood.civ@army.mil
Address Oregon National Guard 173rd Fighter Wing
211 Arnold Ave
Kingsley Field, OR 97602
US
Learn more about this agency
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.
Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil
Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil
Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
As a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12/13, this position works within an Air National Guard Aviation Wing, Maintenance Group, Aircraft Maintenance Squadron, Avionics Element, Avionics Shop, Communications/Navigation/ECM, or Guidance and Control shop. It is an Air National dual status technician position that requires military membership, compatible military skill assignment and classification. The primary purpose of this position is to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. The worker in this career field must demonstrate the ability to perform on- or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.
1. Performs scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Completes operational checks, inspections, tests, trouble shooting, removal and replacement of Line Replaceable Units (LRUs) which are linked with integrated systems and LRUs which are independent or associated with nonintegrated systems. Isolates unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and Flight Line Test Systems (FLTS). Solves complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Adjusts and aligns system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Installs serviceable components into aircraft and performs total systems alignment and harmonization in accordance with existing technical orders and directives. Accomplishes technical order compliances, modification of components/systems and completes thorough system checks for proper operation. Maintains, modifies, calibrates and inspects a wide variety of user test, measurement, and diagnostic equipment (TMDE). Installs, modifies, overhauls, maintains, troubleshoots, repairs, rebuilds, aligns, and calibrates complete electronic avionics multi-systems control. Demonstrates a thorough working knowledge of complex aircraft avionics and or ECM systems such as the electronics package in a highly automated aircraft where the integrated flight and Integrated Countermeasures System, electronic multiplex communications bus, Inertial Navigation System, multi-function displays, head-up display, data transfer equipment, Global Positioning System, Situation Awareness Data-Link (SADL), Data Modem, Flight Control System, pitot-static system and related instrumentation, flight director instrumentation, Central Air Data Computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, VHF, UHF, SATCOM Data, intercom, secure voice communications, Identification Friend or Foe (IFF), and Tactical Air Navigation System (TACAN). Evaluates operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Analyzes the malfunctions encountered through fault codes, determines repair sequence process and performs the repairs.
2. Reviews and analyzes maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Aligns, adjusts, and performs final calibrations on integrated systems to determine successful repairs. Analyzes equipment failure and malfunctions and suggests changes to improve operation. Monitors the operation of complex, interrelated systems, analyzes operating trends, proposes preventative maintenance down time to assure continued operating capability, and recommends components for overhaul or engineering evaluation for disposal. Applies technical data and equipment specifications to determine the impact that equipment modifications or substitutions will have upon integrated multi-system operations and various maintenance alignment procedures. Uses algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Installs, operates, and repairs prototype or experimental electronic systems such as inertial navigation, automatic flight control as assigned.
3. Performs other duties as assigned.
*The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialists at the bottom of the announcement.
Requirements
Conditions of Employment
- National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Participation in direct deposit is mandatory.
- U.S. citizenship is required.
- This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
- The duties of this job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
- Must be able to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
- May occasionally be required to work other than normal duty hours; shift work and/or overtime may be required.
- Federal employment suitability required and determined by a background investigation before appointment to position.
- May be required to successfully complete a probationary period.
- Must have a valid driver's license.
- Must be able to obtain/maintain the necessary security clearance for the position.
- Military Assignment Requirement: Open to Enlisted members only
- Military Rank/Grade Requirement: N/A
- Compatible Military AFSC Requirement: 2A071, 2A374
- This is not a cross training opportunity.
- Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214.
Areas of Consideration:
Area 1 - Current permanent and indefinite T32 technicians of the Oregon ANG.
Area 2 - Current permanent and indefinite T5 employees of the Oregon ANG.
Area 3 - Current service members in the Oregon ANG.
Area 4 - Individuals in the active duty US Air Force, Air Force Reserve, or Air National Guard.
Area 5 - US Citizens eligible to meet the military requirements for membership in the Oregon ANG.
GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS:
An applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade. Experience that prepares the applicant to perform the duties of the position. The applicant s educational-degree study program or specific academic courses may substitute for some specialized experience. An applicant must demonstrate the identified specialized experience competencies (skills, knowledge, abilities and behaviors) to qualify for a FWS 2610 position as identified by its applicable grade.
WG-13 (Flight-Line)
The applicant must have at least 12 months of specialized experiences working as an Electronic Integrated Systems Mechanic, WG-2610-12, and must possess the craftsman level (7-Level) of knowledge and skills to install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Experiences included the ability and skills to perform on-or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on systems such as, automatic flight control systems, instrument systems, inertial and radar navigation systems. Experienced in performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Experiences included completing operational checks, inspections, tests, trouble shooting, removal and replacement of line-replaceable-units which are linked with integrated systems and line-replaceable-units which are independent or associated with nonintegrated systems. Must have skilled capabilities of isolating unusual malfunctions using technical orders, schematics, wiring diagrams, tools, and test equipment including automatic test equipment and flight line test systems. Skilled in solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems. Experiences involved adjusting and aligning system sensors, transmitters, amplifiers, power supplies, display devices, controls, transponders, actuators, servos, computers and other related components. Skilled in the installation of serviceable components into aircraft and performed total systems alignment and harmonization in accordance with existing technical orders and directives. Experienced and skilled in completing technical order compliances, completing component and system modifications, and performing thorough system checks for correct operations. Skilled in maintaining, modifying, calibrating, and inspecting a wide variety of user test, measurement, and diagnostic equipment. Experienced in performing installations, modifications, overhauling, maintaining, troubleshooting, repairing, rebuilding, aligning, and calibrating complete electronic avionics multi-system controls. Must have a thorough working knowledge of complex aircraft avionics or electronic circuit maintenance systems such as, the electronics package in highly automated aircraft where the integrated flight and integrated countermeasures system, electronic multiplex communications bus, inertial navigation system, multi-function displays, head-up display, data transfer equipment, global positioning system, situation awareness data-link, data modem, flight control system, pivot-static system and related instrumentation, flight director instrumentation, central air data computer, engine, hydraulic and fuel quantity indicating systems, voice message warning, various modes of data, intercom, secure voice communications, identification friend or foe, and tactical air navigation system. Experienced in evaluating operational characteristics of the integrated systems by observing and analyzing waveforms, voltage, current, power indications, computer registers and printouts. Skilled in analyzing the malfunctions encountered through fault codes, determining repair sequence process and performing required repairs. Experiences involved reviewing and analyzing maintenance data; determines if criteria are sufficient to provide adequate test, troubleshooting and repair procedures; devises and recommends tests, procedural changes, or data corrections. Skilled in performing alignments, adjustments, and conducting final calibrations on integrated systems to determine successful repairs. Experienced in monitoring the operations of complex, inter-related systems, analyzing operating trends, and proposing preventative maintenance down time. Skilled in the applications of technical data and equipment specifications that determine the impact equipment modifications or substitutions on integrated multi-system operations and various maintenance alignment procedures. Competent in using algebraic and trigonometric functions to adapt standard formulas to the specific requirements of the integrated system. Experiences involved the installation, operation, and repair work on prototypes or experimental electronic systems such as, inertial navigation or automatic flight control. Competent in advising aerospace engineering personnel on the operation and maintenance effects of proposed time compliance technical orders modifications on new or existing equipment.
WG-12 (Flight-Line)
This position is an apprentice or journeyman skill level designed as a developmental opportunity to qualify for merit promotion to the dual status technician PD# D2240P01, Electronic Integrated Systems Mechanic, WG-2610-13, craftsman expertise. Must have at least a three-skill level in one of the compatible PAFSCs, with 12 months of work experience or compatable aircraft maintenance/armament/munitions craftsman (or seven skill level), and required ASVAB scores required by FWS 2610 PAFSC and be able to successfully complete formal training that will result in the award of a compatible Five Skill Level AFSC. NOTE: To credit work experiences gained from completing the compatible PAFSC technical training school program, the applicant must submit technical school certificate(s) and student evaluation(s) to support/verify AFSC work experiences and skills performed while attending the applicable Air Force technical school(s).
Experiences involved installing, modifying, overhauling, maintaining, troubleshooting, repairing, aligning, calibrating, and rebuilding multi-system avionics complexes consisting of multiple completely integrated electronic avionics systems where the complex accomplishes a number of major functions. Skilled in performing on-or-off equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft and/or maintenance on automatic flight control systems, instrument systems, inertial or radar navigation systems. Experiences included performing scheduled and unscheduled maintenance on one or more multi-complex electronic integrated systems. Skilled in conducting operational checks, inspections, tests, trouble shooting, removal and replacement of line replaceable units. Capable of isolating unusual malfunctions by using technical orders, schematics, wiring diagrams, tools, and test equipment to include automatic test equipment and flight line test systems. Experiences involved solving complex problems by analyzing installation, circuitry, and operating characteristics of the systems.
Education
For the WG-13 ANG Dual Status Technician positions, the mandatory military education requirements are the completion of an Air Force Seven Skill Level Technical Training School and awarded a compatible Seven Skill Level AFSC, along with the successful completion of at least one military professional education course program.
For the WG-12 ANG Dual Status Technician positions, the mandatory military training requirements are the completion of an Air Force Three Skill Level Technical Training School and successful On-the-Job training that will result or resulted in the award of a compatible Five Skill Level AFSC.
Additional information
The following applies to Bargaining Unit Positions:
Bargaining unit positions within the Oregon National Guard that are represented by AFGE, local 2986 (AFL-CIO).
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume will be used to determine if you meet the qualifications listed on this announcement. Your supporting documentation will used to determine eligibility. Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.
Qualified candidates will be assigned to a quality category. The quality categories are:
1. Highly Qualified: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements for this position.
2. Qualified: Candidates in this category meet the minimum education and/or experience requirements for this position.
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
In order to qualify for this position you must submit the following: - Detailed resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
- Supporting documentation that show you meet the military rank and AFSC requirements if necessary (Applicants outside of the ORANG must submit documents showing award of AFSC such as a tech school certificate, Data Brief, vMPF rip, and/or DD214).
- Transcripts, license, or certification that you meet the education requirements if necessary. The following items may be submitted as supporting documentation:
- How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Edward Chitwood
Phone (971) 355-3303 Fax (503)581-4164 Email edward.d.chitwood.civ@army.mil
Address Oregon National Guard 173rd Fighter Wing
211 Arnold Ave
Kingsley Field, OR 97602
US
Learn more about this agency
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.
Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil
Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil
Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
Cover Letter, DD-214/ Statement of Service, Diploma/ GED, Disability Letter (Schedule A), Disability Letter (VA), License, OF-306, Police Background Check - DD369, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-15, SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript
RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
In order to qualify for this position you must submit the following:
Cover Letter, DD-214/ Statement of Service, Diploma/ GED, Disability Letter (Schedule A), Disability Letter (VA), License, OF-306, Police Background Check - DD369, PCS Orders, Performance Appraisal, Professional Certification, Proof of Enrollment, Resume, Separation Notice (RIF), SF-15, SF-50/ Notification of Personnel Action, Supplemental Application, and Transcript
RESUME REMINDER - Your resume must include the following information for each job listed: Job title, Duties (be as detailed as possible), Month & year start/end dates (e.g. June 2018 to April 2021), Full-time or part-time status (include hours worked per week), and Series and Grade (applicable for all Federal positions you have held). Be sure that your resume clearly supports your responses to all of the questions in the assessment by addressing your work experience in detail. Resumes can be as many pages as needed to accurately reflect your experience. Recommended: Even though we do not require a specific resume format, your resume must be clear so that we are able to fully evaluate your qualifications. To ensure you receive appropriate consideration, please list the duties you performed under each individual job title. If we are unable to match your experiences with the positions held, you may lose consideration for this vacancy. We cannot make assumptions regarding your qualifications. Using the USA Jobs resume builder is highly encouraged.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Edward Chitwood
Phone (971) 355-3303 Fax (503)581-4164 Email edward.d.chitwood.civ@army.mil
Address Oregon National Guard 173rd Fighter Wing
211 Arnold Ave
Kingsley Field, OR 97602
US
Learn more about this agency
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. If you have any additional questions, please contact either of the two point of contacts below.
Mr. Edward Chitwood
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3303 DSN 355-3303 edward.d.chitwood.civ@army.mil
Mrs. Emma Prosser
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3308 DSN 355-3308 emma.y.prosser.civ@army.mil
Mr. Brandon Webb
Human Resources Specialist (Rec/Plac/Comp) Office 971-355-3053 DSN 355-3053 brandon.d.webb9.civ@mail.mil
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOAF
