Today
Secret
Unspecified
Unspecified
Construction/Facilities
Lincoln, NE (On-Site/Office)
Duties
As a HEAVY MOBILE EQUIPMENT MECHANIC, WG-5803-8/10, duties include:
1. Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles. Inspects repairs, overhauls and tests major systems including gasoline, diesel, electric powered hybrid, multi-fuel, turbine, and other types of internal combustion engines, which may be turbo-charged or blower assisted, automatic or manual transmissions, including those with power take offs, cross-drive transmissions, hydraulic, electric, pneumatic systems and controls, fluid pumping systems, turrets, winches and four-wheel steering systems. Systematically analyzes malfunctions and the cause of mechanical failure by means of visual and auditory checks, uses computer-controlled test equipment, engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges in order to determine the exact nature of extent of repairs or adjustments necessary to complete work. Use specialized diagnostic equipment to troubleshoot problems in complex state-of-the-art electric and electronic systems to identify and replace defective components such as computer control modules, sensors, solenoids, digitized components, and circuits. Develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines. Modify parts to fit or improvises modifications to equipment to correct recurring malfunctions. Makes design modifications to meet special requirements, make adjustment or performs tests. Removes, disassembles overhauls, modifies, adjusts, and repairs, engines, transmissions, or sub-assemblies in accordance with the proper procedures and specifications. Reassembles engines, transmissions, and sub-assemblies, makes adjustments, tests and reinstalls in vehicles and equipment. Determines serviceability by operational driving test.
2. Performs body repair and corrosion control, refinishes and repaints surfaces as required. Repairs and/or replaces body parts, locks, glass, etc. and determines if additional repairs are required. Repairs may be accomplished by using welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests, and repairs radiators/oil coolers and associated parts. Test, services, and repairs vehicle air conditioning systems following manufacturers and environmental guidelines. Replaces or repairs tires, tubes and balances wheel assemblies.
3. Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required. Assists in establishing and maintaining adequate shop stock, special levels parts, and appropriate shop support equipment and tools. Inspect, maintains, and operates all appropriate shop equipment. Researches and assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission. Assists in review and updating maintenance technical orders, shop operating instructions, commercial publications, MAJCOM and local publications, as well as other pertinent directives. Provides expert support to the Customer Service Center to various unit members.
4. Participates as OJT Instructor in the vehicle maintenance area. Conducts instructional classes on methods and procedures of operation and maintenance concerning all aspects of vehicle repairs and assigned shop maintenance support equipment. Evaluates effectiveness of instruction, documents and maintains individual /section training and qualification records.
5. Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area. Fully comprehends and complies with federal, state and local environmental laws and the requirements in Air Force Occupational, Safety and Health Standard (AFOSHSTD).
Performs other duties as assigned.
Requirements
Conditions of Employment
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
FOR QUESTIONS REGARDING ELIGIBILITY TO JOIN THE NEBRASKA AIR NATIONAL GUARD PLEASE CONTACT THE LOCAL RECRUITING OFFICE AT 402-309-1172.
OPEN AREAS OF CONSIDERATION: AREA 1, 2, and 3
DEFINITION OF AREA(S) OF CONSIDERATION:
AREA 1: Current permanent and indefinite technicians of the Nebraska Army or Air National Guard; and current Title 5 employees of the Nebraska Military Department who are military members of the Nebraska National Guard.
AREA 2: All Drill Status/M-Day members and temporary technicians of the Nebraska Air or Army National Guard.
AREA 3: Current military service members who are willing and eligible to become members of the Nebraska Air or Army National Guard.
AREA 4: All qualified candidates eligible and willing to become a member of the Nebraska National Air or Army National Guard prior to the effective date of hire.
MILITARY REQUIREMENTS:
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the Nebraska Air National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Military Grades: Maximum: E-6; Minimum: E-1; Military Grade inversion within the full-time work forces is not permitted. The military grade of the full-time supervisor must equal or exceed the military grade of the personnel supervised.
Military Compatibility: Compatibility will be followed in accordance with 32 USC 709(b) and 10 USC 10216
Compatibility requirements must be met prior to appointment to the position. Selectee has 24 months to become qualified in a compatible military assignment.
Security Clearance/Background Check requirements:
In order to comply with US DOD requirements and ensure the safety and security of the missions, programs, property and personnel of the Nebraska Military Department, employees must obtain the appropriate background investigation and maintain the level of security clearance assigned to their respective work.
Failure to obtain, within one year of appointment, and maintain the designated type of security clearance/background check required for the respective work may result in a job offer being rescinded, separations of employment, or other actions as may be deemed in the best interest of the agency.
Prior to appointment individuals must meet the security clearance requirements for the position or submit the required documents of the Nebraska National Guard, Personnel Security Manager for processing the appropriate investigation. Required forms: SF86, PSIP Initiation Form, Fingerprints, OF306 and Application/Resume.
Nebraska National Guard Information Security Specialist - jason.schroeder.10@us.af.mil; 402-309-1129.
GENERAL EXPERIENCE : Experience or training that has provided the candidate with the skill to make repairs or the ability to assist with repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts.
SPECIALIZED EXPERIENCE :
WG-08 - 12 months experience or training using common hand tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories such as filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, and other items of similar complexity. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to heavy duty vehicles; and skill to replace, fit, install, and make adjustments, such as performing engine tune-ups, timing distributors, and adjusting brakes. Experience which demonstrates an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience which demonstrates the ability to read and interpret parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
WG-10 - 18 months Experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
Education
No substitution of education for this position
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. Your answers to the assessment questionnaire will be verified against information provided in your resume and other supporting documentation. Be sure that your resume clearly supports your responses to all the questions addressing experience and education relevant to this position.
In describing your experience, please be clear and specific, we will not make assumptions regarding your experience. If, after reviewing your resume and supporting documentation, a determination is made that you have inflated your qualifications or experiences, your rating will be adjusted or you may be excluded from consideration for this position.
Your qualifications will be evaluated against general and specialized experience under the "Qualifications" section and against the following competencies (knowledge, skills, abilities and other characteristics):
Ability To Use and Maintain Tools and Equipment, Knowledge of Equipment Assembly, Installation, Repair, etc., and Trouble Shooting
To preview the assessment questionnaire, please use the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12601264
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
Use this link for Resume Tips .
2. Other supporting documents (optional)
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (Eastern) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jon Sronce
Phone 402-309-8173 Email jon.c.sronce.civ@army.mil
Address NE 155 LRS
2420 W Butler Ave
Lincoln, NE 68524
US
Learn more about this agency
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Qualified candidates will be referred to the selecting official in the following order:
1. Fully qualified Area 1 applicants
2. Fully qualified Area 2 applicants
3. Fully qualified Area 3 applicants
4. Trainees
WG-08 MAY BE PROMOTED TO WG-10 UPON COMPLETION OF THE FOLLOWING: (1) 6 MONTHS OF EXPERIENCE APPOINTED IN THE POSITION; (2) COMPLETION OF AN INDIVIDUAL DEVELOPMENT PLAN (IDP); AND (3) COMPLETION OF A CLASSIFICATION REVIEW. INDIVIDUAL MAY BE PROMOTED WITHOUT FURTHER COMPETITION WHEN QUALIFIED AND RECOMMENDED BY THE SELECTING OFFICIAL; HOWEVER PROMOTION IS NOT GUARANTEED. APPLICANTS MUST INDICATE ON THEIR APPLICATION THE LOWEST GRADE FOR WHICH THEY WISH TO BE CONSIDERED.
The initial cut-off date for first consideration is 11:59 pm, CST, 26 NOV 2024 ; applications received by this date will have the first opportunity for review. Applications received after this date will be given consideration only if there is a need for further review. If further reviews are required, they will occur weekly or until a certificate of eligibles is exhausted.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
As a HEAVY MOBILE EQUIPMENT MECHANIC, WG-5803-8/10, duties include:
1. Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles. Inspects repairs, overhauls and tests major systems including gasoline, diesel, electric powered hybrid, multi-fuel, turbine, and other types of internal combustion engines, which may be turbo-charged or blower assisted, automatic or manual transmissions, including those with power take offs, cross-drive transmissions, hydraulic, electric, pneumatic systems and controls, fluid pumping systems, turrets, winches and four-wheel steering systems. Systematically analyzes malfunctions and the cause of mechanical failure by means of visual and auditory checks, uses computer-controlled test equipment, engine analyzers, compression testers, voltmeters, ohmmeters and pressure gauges in order to determine the exact nature of extent of repairs or adjustments necessary to complete work. Use specialized diagnostic equipment to troubleshoot problems in complex state-of-the-art electric and electronic systems to identify and replace defective components such as computer control modules, sensors, solenoids, digitized components, and circuits. Develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines. Modify parts to fit or improvises modifications to equipment to correct recurring malfunctions. Makes design modifications to meet special requirements, make adjustment or performs tests. Removes, disassembles overhauls, modifies, adjusts, and repairs, engines, transmissions, or sub-assemblies in accordance with the proper procedures and specifications. Reassembles engines, transmissions, and sub-assemblies, makes adjustments, tests and reinstalls in vehicles and equipment. Determines serviceability by operational driving test.
2. Performs body repair and corrosion control, refinishes and repaints surfaces as required. Repairs and/or replaces body parts, locks, glass, etc. and determines if additional repairs are required. Repairs may be accomplished by using welding equipment, power tools, hand tools and other specialized equipment. Cleans, tests, and repairs radiators/oil coolers and associated parts. Test, services, and repairs vehicle air conditioning systems following manufacturers and environmental guidelines. Replaces or repairs tires, tubes and balances wheel assemblies.
3. Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required. Assists in establishing and maintaining adequate shop stock, special levels parts, and appropriate shop support equipment and tools. Inspect, maintains, and operates all appropriate shop equipment. Researches and assists in requisitioning materials, parts and equipment necessary to perform the vehicle maintenance/management mission. Assists in review and updating maintenance technical orders, shop operating instructions, commercial publications, MAJCOM and local publications, as well as other pertinent directives. Provides expert support to the Customer Service Center to various unit members.
4. Participates as OJT Instructor in the vehicle maintenance area. Conducts instructional classes on methods and procedures of operation and maintenance concerning all aspects of vehicle repairs and assigned shop maintenance support equipment. Evaluates effectiveness of instruction, documents and maintains individual /section training and qualification records.
5. Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area. Fully comprehends and complies with federal, state and local environmental laws and the requirements in Air Force Occupational, Safety and Health Standard (AFOSHSTD).
Performs other duties as assigned.
Requirements
Conditions of Employment
- Military membership in the Nebraska National Guard Membership is required.
- Males born after 31 December 1959 must be registered for Selective Service.
- Obtain/maintain the level of security clearance/background check required.
- May be required to successfully complete a probationary period.
- Direct Deposit is mandatory.
- Individuals with military incentive bonuses may be subject to recoupment.
NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is a Title 32 excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.
FOR QUESTIONS REGARDING ELIGIBILITY TO JOIN THE NEBRASKA AIR NATIONAL GUARD PLEASE CONTACT THE LOCAL RECRUITING OFFICE AT 402-309-1172.
OPEN AREAS OF CONSIDERATION: AREA 1, 2, and 3
DEFINITION OF AREA(S) OF CONSIDERATION:
AREA 1: Current permanent and indefinite technicians of the Nebraska Army or Air National Guard; and current Title 5 employees of the Nebraska Military Department who are military members of the Nebraska National Guard.
AREA 2: All Drill Status/M-Day members and temporary technicians of the Nebraska Air or Army National Guard.
AREA 3: Current military service members who are willing and eligible to become members of the Nebraska Air or Army National Guard.
AREA 4: All qualified candidates eligible and willing to become a member of the Nebraska National Air or Army National Guard prior to the effective date of hire.
MILITARY REQUIREMENTS:
Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the Nebraska Air National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
Military Grades: Maximum: E-6; Minimum: E-1; Military Grade inversion within the full-time work forces is not permitted. The military grade of the full-time supervisor must equal or exceed the military grade of the personnel supervised.
Military Compatibility: Compatibility will be followed in accordance with 32 USC 709(b) and 10 USC 10216
Compatibility requirements must be met prior to appointment to the position. Selectee has 24 months to become qualified in a compatible military assignment.
Security Clearance/Background Check requirements:
In order to comply with US DOD requirements and ensure the safety and security of the missions, programs, property and personnel of the Nebraska Military Department, employees must obtain the appropriate background investigation and maintain the level of security clearance assigned to their respective work.
Failure to obtain, within one year of appointment, and maintain the designated type of security clearance/background check required for the respective work may result in a job offer being rescinded, separations of employment, or other actions as may be deemed in the best interest of the agency.
Prior to appointment individuals must meet the security clearance requirements for the position or submit the required documents of the Nebraska National Guard, Personnel Security Manager for processing the appropriate investigation. Required forms: SF86, PSIP Initiation Form, Fingerprints, OF306 and Application/Resume.
Nebraska National Guard Information Security Specialist - jason.schroeder.10@us.af.mil; 402-309-1129.
GENERAL EXPERIENCE : Experience or training that has provided the candidate with the skill to make repairs or the ability to assist with repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts.
SPECIALIZED EXPERIENCE :
WG-08 - 12 months experience or training using common hand tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories such as filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, and other items of similar complexity. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to heavy duty vehicles; and skill to replace, fit, install, and make adjustments, such as performing engine tune-ups, timing distributors, and adjusting brakes. Experience which demonstrates an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience which demonstrates the ability to read and interpret parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
WG-10 - 18 months Experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.
Education
No substitution of education for this position
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency ( https://www.sss.gov/RegVer/wfRegistration.aspx ).
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. Your answers to the assessment questionnaire will be verified against information provided in your resume and other supporting documentation. Be sure that your resume clearly supports your responses to all the questions addressing experience and education relevant to this position.
In describing your experience, please be clear and specific, we will not make assumptions regarding your experience. If, after reviewing your resume and supporting documentation, a determination is made that you have inflated your qualifications or experiences, your rating will be adjusted or you may be excluded from consideration for this position.
Your qualifications will be evaluated against general and specialized experience under the "Qualifications" section and against the following competencies (knowledge, skills, abilities and other characteristics):
Ability To Use and Maintain Tools and Equipment, Knowledge of Equipment Assembly, Installation, Repair, etc., and Trouble Shooting
To preview the assessment questionnaire, please use the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12601264
- Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits .
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
Use this link for Resume Tips .
2. Other supporting documents (optional)- Cover Letter
- DD-214
- Other
- Other Veterans Document
- SF-50
- Transcript
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. - How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (Eastern) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jon Sronce
Phone 402-309-8173 Email jon.c.sronce.civ@army.mil
Address NE 155 LRS
2420 W Butler Ave
Lincoln, NE 68524
US
Learn more about this agency
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Qualified candidates will be referred to the selecting official in the following order:
1. Fully qualified Area 1 applicants
2. Fully qualified Area 2 applicants
3. Fully qualified Area 3 applicants
4. Trainees
WG-08 MAY BE PROMOTED TO WG-10 UPON COMPLETION OF THE FOLLOWING: (1) 6 MONTHS OF EXPERIENCE APPOINTED IN THE POSITION; (2) COMPLETION OF AN INDIVIDUAL DEVELOPMENT PLAN (IDP); AND (3) COMPLETION OF A CLASSIFICATION REVIEW. INDIVIDUAL MAY BE PROMOTED WITHOUT FURTHER COMPETITION WHEN QUALIFIED AND RECOMMENDED BY THE SELECTING OFFICIAL; HOWEVER PROMOTION IS NOT GUARANTEED. APPLICANTS MUST INDICATE ON THEIR APPLICATION THE LOWEST GRADE FOR WHICH THEY WISH TO BE CONSIDERED.
The initial cut-off date for first consideration is 11:59 pm, CST, 26 NOV 2024 ; applications received by this date will have the first opportunity for review. Applications received after this date will be given consideration only if there is a need for further review. If further reviews are required, they will occur weekly or until a certificate of eligibles is exhausted. - Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
Use this link for Resume Tips .
2. Other supporting documents (optional)
- Cover Letter
- DD-214
- Other
- Other Veterans Document
- SF-50
- Transcript
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education .
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (Eastern) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account ( https://my.usajobs.gov/Account/Login ), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/ .
Agency contact information
Jon Sronce
Phone 402-309-8173 Email jon.c.sronce.civ@army.mil
Address NE 155 LRS
2420 W Butler Ave
Lincoln, NE 68524
US
Learn more about this agency
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Qualified candidates will be referred to the selecting official in the following order:
1. Fully qualified Area 1 applicants
2. Fully qualified Area 2 applicants
3. Fully qualified Area 3 applicants
4. Trainees
WG-08 MAY BE PROMOTED TO WG-10 UPON COMPLETION OF THE FOLLOWING: (1) 6 MONTHS OF EXPERIENCE APPOINTED IN THE POSITION; (2) COMPLETION OF AN INDIVIDUAL DEVELOPMENT PLAN (IDP); AND (3) COMPLETION OF A CLASSIFICATION REVIEW. INDIVIDUAL MAY BE PROMOTED WITHOUT FURTHER COMPETITION WHEN QUALIFIED AND RECOMMENDED BY THE SELECTING OFFICIAL; HOWEVER PROMOTION IS NOT GUARANTEED. APPLICANTS MUST INDICATE ON THEIR APPLICATION THE LOWEST GRADE FOR WHICH THEY WISH TO BE CONSIDERED.
The initial cut-off date for first consideration is 11:59 pm, CST, 26 NOV 2024 ; applications received by this date will have the first opportunity for review. Applications received after this date will be given consideration only if there is a need for further review. If further reviews are required, they will occur weekly or until a certificate of eligibles is exhausted.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
- Criminal history inquiries
- Equal Employment Opportunity (EEO) Policy
- Financial suitability
- New employee probationary period
- Privacy Act
- Reasonable accommodation policy
- Selective Service
- Signature and false statements
- Social security number request
group id: DOAF
