Dec 31, 2024
Secret
Mid Level Career (5+ yrs experience)
Occasional travel
Engineering - Electrical
Aber Prov Grd, MD (On/Off-Site)
Parra Consulting Group, Inc. is currently seeking an Electrical Engineer to support our client located at Aberdeen Proving Grounds, Maryland.
This successful candidate will be responsible for the following:
• Work with cutting-edge technologies including RF transmitters, RF receivers, GPS, RF amplifiers, and digital circuits specifically tailored for UAVs and land-based sensors.
• Apply RF test techniques and characterize components and circuits relevant to unmanned aircraft systems (UAS).
• Assist engineers in design investigations, product replication, and development processes, focusing on UAS applications.
• Conduct basic research, testing, debugging, performance validation, quality control, and deployment related to UAS electronics.
• Aid in the development of test fixtures using the latest electronic and mechanical CAD software, 3D printing, and PCB fabrication, with a particular emphasis on UAS requirements.
• Gain immersion and growth opportunities in manufacturing processes and test methods, specifically related to UAS technologies.
• Conduct fundamental investigations, evaluations, applications, and design implementations of new technologies, with a focus on integrating them into UAS platforms.
Qualifications Required:
• Active Secret Clearance
• Knowledge or experience with analog or digital RF circuits, particularly in the context of UAS.
• Proficiency in using RF test equipment such as network and spectrum analyzers, oscilloscopes, mixed-signal generators, and power meters.
• Knowledge of drone hardware, software, and communication protocols.
• Experience in soldering small and large components, with an understanding of UAS-specific requirements.
• Ability to design power distribution systems, including wiring harnesses and battery systems, tailored for UAS applications.
• Experience with the design and integration of electronics on Unmanned Aerial Systems (UAS), Remote Controlled Improvised Explosive Devices (RCIED), or waterborne IEDs.
• Responsible for Test, Verification, and Validation (V&V) of fabricated threat replicas utilizing benchtop equipment while following appropriate test plans.
• Collaboration with engineers and peers assigned to projects to rectify discrepancies in design and/or documentation, specifically focusing on UAS electronics.
• Ability to troubleshoot circuits and perform repairs as necessary, with a keen understanding of UAS-specific challenges.
• Capability to perform all functional duties independently, ensuring the seamless operation of UAS-related tasks.
Qualifications Are Nice TO Have:
• Experience with COTS multi-rotor and fixed-wing aircraft, to include hobbyist UAS experience.
• Knowledge of various modulation formats in communication, particularly in the context of UAS applications.
• IPC soldering certification, with a focus on meeting UAS-specific standards.
• Experience with tools/skill sets including Software Defined Radios (RTL-SDR, HackRF or similar), RFID, and Near-field Communication (NFC), with a focus on integrating them into UAS platforms.
This successful candidate will be responsible for the following:
• Work with cutting-edge technologies including RF transmitters, RF receivers, GPS, RF amplifiers, and digital circuits specifically tailored for UAVs and land-based sensors.
• Apply RF test techniques and characterize components and circuits relevant to unmanned aircraft systems (UAS).
• Assist engineers in design investigations, product replication, and development processes, focusing on UAS applications.
• Conduct basic research, testing, debugging, performance validation, quality control, and deployment related to UAS electronics.
• Aid in the development of test fixtures using the latest electronic and mechanical CAD software, 3D printing, and PCB fabrication, with a particular emphasis on UAS requirements.
• Gain immersion and growth opportunities in manufacturing processes and test methods, specifically related to UAS technologies.
• Conduct fundamental investigations, evaluations, applications, and design implementations of new technologies, with a focus on integrating them into UAS platforms.
Qualifications Required:
• Active Secret Clearance
• Knowledge or experience with analog or digital RF circuits, particularly in the context of UAS.
• Proficiency in using RF test equipment such as network and spectrum analyzers, oscilloscopes, mixed-signal generators, and power meters.
• Knowledge of drone hardware, software, and communication protocols.
• Experience in soldering small and large components, with an understanding of UAS-specific requirements.
• Ability to design power distribution systems, including wiring harnesses and battery systems, tailored for UAS applications.
• Experience with the design and integration of electronics on Unmanned Aerial Systems (UAS), Remote Controlled Improvised Explosive Devices (RCIED), or waterborne IEDs.
• Responsible for Test, Verification, and Validation (V&V) of fabricated threat replicas utilizing benchtop equipment while following appropriate test plans.
• Collaboration with engineers and peers assigned to projects to rectify discrepancies in design and/or documentation, specifically focusing on UAS electronics.
• Ability to troubleshoot circuits and perform repairs as necessary, with a keen understanding of UAS-specific challenges.
• Capability to perform all functional duties independently, ensuring the seamless operation of UAS-related tasks.
Qualifications Are Nice TO Have:
• Experience with COTS multi-rotor and fixed-wing aircraft, to include hobbyist UAS experience.
• Knowledge of various modulation formats in communication, particularly in the context of UAS applications.
• IPC soldering certification, with a focus on meeting UAS-specific standards.
• Experience with tools/skill sets including Software Defined Radios (RTL-SDR, HackRF or similar), RFID, and Near-field Communication (NFC), with a focus on integrating them into UAS platforms.
group id: 10334270
